With the CM11SA you have the basis for automating your entire house.
With your computer you can program whatever you want. Switching on your lights at set or varying times (standard presence simulation), creating a home movie theatre, switching your outside lighting or having a fresh pot of coffee ready when you are woken up by the atmospheric lighting in your bedroom. In combination with the CM11 you only need receivers in order to control your lighting and equipment. Once everything is set according to your wishes, you can enter this into the memory of the CM11 and turn off your computer. You can also pre-set the CM11 for use in another house.
• Memory suitable for approximately 100 macros/timers.
• User friendly software for beginners.
• This is the entry level computer interface, please use the CM15SA Pro for more advanced features.
• Compatible with Windows 2000+ and XP

Two-Load Appliance Module PLC-R 2268E
It can be fixed behind your any existing switches
Controls 2 x Fluorescent lamps or Appliances
small size (43.25x47mm and only 18.9 mm thick)
Rated Voltage:230VAC±10% 50Hz
Load Style:Fluorescent lamp or Appliance
Load Power:≤800W x 2
Static State Wastage: 1W
Suitable Temperature:-10～50℃
Electronically Programmable

One-Load Appliance Module PLC-R 2267E
It can be fixed behind your any existing switches
Controls Fluorescent lamps or Appliances
small size (43.25x47mm and only 18.9 mm thick)
Rated Voltage:230VAC±10% 50Hz
Load Style:Fluorescent lamp or Appliance
Load Power:≤800W
Static State Wastage: 1W
Suitable Temperature:-10～50℃
Electronically Programmable

250W Dimmer Module, fits behind the existing wall switch.
• Neutral wire is required.
• Not compatible with wire wound transformers (for 12V downlights)
• Only compatible with incandescent and electronic dimming modules (12V Downlights)
• Easy installation in 5 minutes
• Requires lever type wall switch (on/off localy and dim via X10)
• Dimensions: 43mm x 46mm x 20mm

Dual Dimmer Module, fits behind the existing wall switch (Max combined load of 250W)
• Neutral Wire required
• Only compatible with incandescent and electronic dimming module (12V downlights)
• Easy Installation in 5 minutes
• Requires lever type wall switch (on/off locally and dim via X10)

The Motor Drive Wall Switch is perfect to control curtains, shutters, blinds and even your projector screen.
The SW10G is designed for controlling screens that move up and down, or shutters that move left and right.
Remove your existing switch for the SW10G, at a touch of a button you can set the movie feel in your TV lounge.
• Please note with this module you already need a motor and this is merely a X10 compatible switch to control the motor.

The Mini Controller lets you remotely
-control up to 8 different X10 devices
-turn on/off your appliances from your bedside
-dim/brighten and turn on/off lamps effortlessly

X10 Inline Filter with Phase Coupling
Installed at the main switch board, the FD10 prevents X10 signals from leaving/entering the installation, preventing neighbouring interference.
• Filters 'noise' on electrical lines
• Able to couple X10 signals in multiple phase installations (1 FD10 per phase)
• Rated 240V/63A
Filtering:
Interference that reduces the range of your X10 home control system can sometimes come into your home from the incoming electricity supply. The FD10 suppresses this interference, thus increasing the range and reliability of your system. It also stops the unlikely chance of your neighbour's X10 system turning on and off your lights!
Coupling:
If you have X10 home control receivers on multiple phases, the signals will not be able to get from one to the other. In this case you'll need a 3-phase coupler. The FD10 has the ability to couple X10 signals across phases, you'll need one FD10 per phase. The FD10 is a passive coupler, meaning that it simply allows the signal to pass through onto the other phases.

3 Piece Starter Light Kit
This kit is perfect for first time X10 Home Automation
Kit Includes:
• LM15ES Socket Rocket (Screw) or (Bayonet)
• TM13SA Tranceiver Module
• KR22E Handheld Remote

Floodcam Motion Activated Camera & Dual Floodlight.
Instantly and automatically shine powerful floodlights on any intruder—humans and animals alike—whenever motion is detected! The FloodCam combines the best of X10 surveillance and motion-activation technology in one ultra-powerful solution. Outdoor motion-activated lights are an extremely effective way of deterring theft and vandalism, and the integrated wireless COLOR video camera is compatible with all other wireless X10 cameras, so it's easy to add the FloodCam to an existing surveillance setup or start one from scratch!
To view your flood cam hidden video camera combine your floodcam purchase with the VM42/VM52 video receiver to view camera images straight to your TV. Imagine hearing a noise outside, simply turn on your TV to view the motion detected outside.