Simply screw this module into an existing lampholder, replace the bulb, and you're ready to control the lamp using X10.
• Remote control on and off
• All LIGHTS ON and ALL LIGHTS OFF
• Also suitable for low-energy light bulbs

X10 Bayonet Lamp Module (Socket Rocket)
Lamp module fits into a standard bayonet lamp holder.
• Provides on and off functions
• Responds to ALL-LIGHTS-ON and ALL-LIGHTS-OFF
• Suitable for use with energy saving bulbs
• Please note that this unit does not have any dimming functionality

Dual Dimmer Module, fits behind the existing wall switch (Max combined load of 250W)
• Neutral Wire required
• Only compatible with incandescent and electronic dimming module (12V downlights)
• Easy Installation in 5 minutes
• Requires lever type wall switch (on/off locally and dim via X10)

250W Dimmer Module, fits behind the existing wall switch.
• Neutral wire is required.
• Not compatible with wire wound transformers (for 12V downlights)
• Only compatible with incandescent and electronic dimming modules (12V Downlights)
• Easy installation in 5 minutes
• Requires lever type wall switch (on/off localy and dim via X10)
• Dimensions: 43mm x 46mm x 20mm

The Wired lamp module receives X10 commands sent on the power lines by an X10 controller. Control any incandescent light in your home within seconds.
• Dimmer module without plug
• On/Off and dimming control
• Dim lights that you couldn't dim before
• Only suitable for normal light bulbs up to 300W
• Flying lead connection block with dim function
••Not suitable for low voltage lights, not suitable for fluorescent or halogen lights••

Dimmer Plug-in Module is a 300W receiver unit that works as a remote dimmer/on and off lighting module.
The dimmer module can be used at any all outlet in the house with incandescent lamps between 40W and 300W. As the dimmer is simply inserted into the wall outlets like an ordinary plug, there is no installation to be carried out.
- On/Off and dimmer control of incandescent lighting.
- Designed to operate with 230VAC 60W to 300W incandescentor 12V halogen lamps.

The LW12 is a MicroModule with built-in dimmer that can be installed behind existing momentary switches or wall outlets.
• Built in Dimmer micromodule (60W-250W)
• Makes your X10 system invisible
• Remote control on/off and dim/bright
• Local control with momentary switch
• Memory function for last dimmer setting
• Soft-start and soft-dim function
• Works with X10 controllers
• Neutral wire not required
• Uses one way X10 communication
• Programed "all lights on/off"
• only compatible with incandescent and electronic dimming modules (12V downlights)
• Size 46mmx46mmx12mm

X10 DIN rail dimmer is a 700W receiver module that serves as a remote controlled dimmer. Will control standard bulb lights, and low voltage lighting up to a maximum of 700W. The lamp module has a soft-start (when turned on, the module will gradually brighten the light from 0 up to the last dim level. When turned off, the reverse occurs.)
Unit can be turned on/off, brightened/dimmed either by an X10 controller (remote or PC)or by external momentary action switches connected to Terminal 2. It responds to "standard" X10 commands. ie. All-Lights-On, All-Units-Off, On, Off, Bright and Dim. It also responds to extended X10 commands. Combined with the memory dim feature, the LD10 can change the room lighting instantly or progressively.