One-Load Appliance Module PLC-R 2267E
It can be fixed behind your any existing switches
Controls Fluorescent lamps or Appliances
small size (43.25x47mm and only 18.9 mm thick)
Rated Voltage:230VAC±10% 50Hz
Load Style:Fluorescent lamp or Appliance
Load Power:≤800W
Static State Wastage: 1W
Suitable Temperature:-10～50℃
Electronically Programmable

Two-Load Appliance Module PLC-R 2268E
It can be fixed behind your any existing switches
Controls 2 x Fluorescent lamps or Appliances
small size (43.25x47mm and only 18.9 mm thick)
Rated Voltage:230VAC±10% 50Hz
Load Style:Fluorescent lamp or Appliance
Load Power:≤800W x 2
Static State Wastage: 1W
Suitable Temperature:-10～50℃
Electronically Programmable

AM12 Micromodule is an extremely small X10 appliance module which can be fitted behind any installed switch or outlet. Appliances connected to the AW12 can be controlled by the X10 system. You will be able to use your switch in the normal way. The AW12 uses one-way X10 communication.
The internal relay can also be tripped by external latched or momentary action wall switches.
The internal relay can also be tripped by external latched or momentary action wall switches.

The Wired Appliance Module receives X10 commands sent on the power lines by an X10 controller.
This small unit fits almost anywhere. It can be built–in to, or wired to the appliance you want it to control. Add remote or automated control to any appliance or light in your home.
Look what you can control with the Appliance Module:
Air-conditioners, Heaters, Fountains & pool pumps, Heated towel rails,
Fluorescent lights, Electric blankets, Ceiling fans etc

The AM12 Appliance Module is based on a remotely controlled relay to be used in any wall socket. Appliances can be connected to the front of the module.
• Switch module to turn 230V appliances on/off
• Suitable for appliances up to 2000W loads
• Remote control via the mains using X10 Commands (On;Off)
• Wall outlet plugin module

Simply screw this module into an existing lampholder, replace the bulb, and you're ready to control the lamp using X10.
• Remote control on and off
• All LIGHTS ON and ALL LIGHTS OFF
• Also suitable for low-energy light bulbs

The X-10 DIN rail switch is a remote controlled relay. Discreetly installed at the junction box, it switches hard-wired circuits with several switches (e.g. hallway lighting). The internal relay can be tripped either by external latched or momentary action wall switches or by an X-10 controller. The Din Rail Switch (AD10) responds to "standard" X-10 that is: "all units off" from any X-10 controller set to its house code regardless of unit code or alternatively individual unit control by "ON" and "OFF". When the relay is energized, the LED above the slide switch is illuminated. Professional installation recommended.

X10 Bayonet Lamp Module (Socket Rocket)
Lamp module fits into a standard bayonet lamp holder.
• Provides on and off functions
• Responds to ALL-LIGHTS-ON and ALL-LIGHTS-OFF
• Suitable for use with energy saving bulbs
• Please note that this unit does not have any dimming functionality

Dual Dimmer Module, fits behind the existing wall switch (Max combined load of 250W)
• Neutral Wire required
• Only compatible with incandescent and electronic dimming module (12V downlights)
• Easy Installation in 5 minutes
• Requires lever type wall switch (on/off locally and dim via X10)

250W Dimmer Module, fits behind the existing wall switch.
• Neutral wire is required.
• Not compatible with wire wound transformers (for 12V downlights)
• Only compatible with incandescent and electronic dimming modules (12V Downlights)
• Easy installation in 5 minutes
• Requires lever type wall switch (on/off localy and dim via X10)
• Dimensions: 43mm x 46mm x 20mm

The Wired lamp module receives X10 commands sent on the power lines by an X10 controller. Control any incandescent light in your home within seconds.
• Dimmer module without plug
• On/Off and dimming control
• Dim lights that you couldn't dim before
• Only suitable for normal light bulbs up to 300W
• Flying lead connection block with dim function
••Not suitable for low voltage lights, not suitable for fluorescent or halogen lights••

Dimmer Plug-in Module is a 300W receiver unit that works as a remote dimmer/on and off lighting module.
The dimmer module can be used at any all outlet in the house with incandescent lamps between 40W and 300W. As the dimmer is simply inserted into the wall outlets like an ordinary plug, there is no installation to be carried out.
- On/Off and dimmer control of incandescent lighting.
- Designed to operate with 230VAC 60W to 300W incandescentor 12V halogen lamps.

The LW12 is a MicroModule with built-in dimmer that can be installed behind existing momentary switches or wall outlets.
• Built in Dimmer micromodule (60W-250W)
• Makes your X10 system invisible
• Remote control on/off and dim/bright
• Local control with momentary switch
• Memory function for last dimmer setting
• Soft-start and soft-dim function
• Works with X10 controllers
• Neutral wire not required
• Uses one way X10 communication
• Programed "all lights on/off"
• only compatible with incandescent and electronic dimming modules (12V downlights)
• Size 46mmx46mmx12mm

X10 DIN rail dimmer is a 700W receiver module that serves as a remote controlled dimmer. Will control standard bulb lights, and low voltage lighting up to a maximum of 700W. The lamp module has a soft-start (when turned on, the module will gradually brighten the light from 0 up to the last dim level. When turned off, the reverse occurs.)
Unit can be turned on/off, brightened/dimmed either by an X10 controller (remote or PC)or by external momentary action switches connected to Terminal 2. It responds to "standard" X10 commands. ie. All-Lights-On, All-Units-Off, On, Off, Bright and Dim. It also responds to extended X10 commands. Combined with the memory dim feature, the LD10 can change the room lighting instantly or progressively.